Rebuild Sheet (RBS)#
Experimental. Rebuilds a sheet with a new thickness and bend radius. One skin is turned back into a surface and built up again, so that skin keeps its place. It is side 0, or the hems' outer skin when they all fold the same way. Hems keep their size, the sheet's own reliefs are kept, and its properties carry over. Always check the result.
| Name | Nick | Type | Access | Default | Description |
|---|
| Sheet | S | Sheet | item | | The sheet to rebuild. |
| Thickness | T | Number | item | | New material thickness, in document units. Must be above zero. Leave it empty to keep the sheet's thickness. |
| Bend Radius | BR | Number | item | | New inner radius for every bend, in document units. Must be above zero. Leave it empty to keep each bend's own radius. |
Outputs#
| Name | Nick | Type | Access | Default | Description |
|---|
| Sheet | S | Sheet | item | | The rebuilt sheet with the new thickness and radius. |
Sheet To Non-Manifold (STNM)#
Experimental. Turns a Sheet back into a surface BREP with no thickness: one side of the part, with each bend replaced by a sharp edge. Use it to edit a sheet as surfaces, or to feed it into Non-Manifold To Sheet again with other settings. Precision can drop on uneven bend edges, so check the output.
| Name | Nick | Type | Access | Default | Description |
|---|
| Sheet | S | Sheet | item | | The sheet to turn into a surface. |
| Side Index | SI | Integer | item | 0 | Which side of the sheet to keep as the surface: 0 (top) or 1 (bottom). |
Outputs#
| Name | Nick | Type | Access | Default | Description |
|---|
| Brep | B | Brep | item | | The surface BREP, with sharp edges where the bends were. |